In autumn 1971 Lenco released the Lenco 8002 amplifier. The electronics was designed and produced by HEA Vienna. It is based on HEA’s ST 8040 Si-transistor amplifier. The RIAA pre-amplifier was on board and could be switched between crystal and dynamic cartridges. It contains also a Stereo FM-Tuner with 3 pre-sets.

There was also a Lenco 8000 System with a built in L 75 - or later on - a L 78 record player. With the Model 2848 Lenco also delivered the appropriate speakers.

Lenco 8002

Output power:

Distortion:

Frequency response:

Input sensitivity Tape DIN socket:

Input sensitivity Phono DIN socket:

2 x 40 W into 4 Ω

< 0.15 % @ 2 x 40W / 1kHz

20 Hz - 30’000 Hz ± 1.5 dB

200 mV / 270 kΩ

4 mV / 47 kΩ

Compact and solid built HEA ST 8040 transistor amplifier module from 1971.

Lenco 8002 FM-Tuner

Lenco 8002 FM-pre-sets

Lenco 2848 3-way-speaker